Mold remover formula

Unified Technologies Announces NuSoft, UltraSoft Die and Mold Non-Destructive Cleaning Media

FlexShot soft mount

FlexShot UltraSoft Metallic Bead

Cleaning of extrusion dies

FlexShot UltraSoft Metallic Bead

Cleaning of glass molds

FlexShot UltraSoft Metalbead Blast Cleaning Media NuSoft, non-destructive blasting applications where little or no surface damage can be tolerated

PAINESVILLE, OHIO, USA, Oct. 11, 2022 / — This revolutionary non-destructive blasting media is the most advanced way of blasting when no damage to the surface can be tolerated, it’s sandblasting safe, fast and economical media.

NuSoft the UltraSoft, spherical, microscopic low carbon steel shot media. It is a metallic grey/silver in appearance and can be used in centrifugal shot blast machines as well as vacuum and pressure blast cabinets. When using NuSoft, media consumption can be reduced due to its long service life. NuSoft Steel Shot is a metallurgically enhanced cast steel shot developed for cleaning soft and delicate metal parts in standard centrifugal wheel shot blasters or pressure air cabinets. Nu-Soft Steel Shot is round in shape with a hardness between 12 and 15 Rockwell C (less than 200HV). Ultra low in carbon, it has a density slightly above 7g/cc. Nu-Soft Steel Shot is highly durable with over twice the life of standard SAE grades of cast steel shot and nearly a thousand times the life of some competitive abrasive media.

Typical applications (without dimensional modifications of the components):
Remove heat treatment scale from components and sintered powder metal parts
Polishes surfaces while cleaning extrusion dies, glass molds and rubber molds
Among the softest shot blast media for cleaning aluminum dies (less than 20 Rc)
No abrasion or base metal removal/dimensional change
Economical = outlasts other media by thousands of cycles!
Recyclable = less waste and reduced handling costs
Environmentally friendly and non-hazardous

Superior quality
NuSoft flexshot Steel Shot is made from premium quality virgin cast steel shot – no other material is added during the manufacturing process. Only fully round shot particles are shipped to you. Once in the oven, the shot chemistry is carefully modified for optimum performance.

Safe to use
NuSoft Steel Shot will not damage intricate detail work, “texture” polished or machined surfaces, or degrade threads in tapped holes. Due to its unique chemistry, NuSoft ultrasoft Steel Shot will not harden or distort the workpiece, and it resists breaking down too quickly into dust or fines. It will not strip metal from part surfaces or damage the wear parts of the sandblasting machine.

NuSoft Steel Shot has a density equal to that of standard steel shot, so it will flow easily through your shot blaster with no amp drop to the wheel. If your shot blaster uses a magnetic separator, it will also work great with NuSoft Steel Shot.

Not only is NuSoft safe to use on your product and in your shot blasting equipment, it is a non-hazardous material and can be disposed of the same way as your standard SAE shot.

Art Koch
Unified technologies
+1 440-897-5226
write to us here
Visit us on social media: